PRODUCTS
Aluminum Cap

Aluminum Cap

Aluminum pipe fittings ( elbow, tee, cap ) are made in two or four precision formed matching halves to cover and weatherproof pipe elbow, tee and caps.Performed aluminum pipe fittings are a premier protective outer surface for mechanical insulation systems on pipe and are an excellent performing and critical accessory to complement the aluminum jacketing, to protect the insulation and underlying pipe from physical damage, UV exposure, corrosive atmospheres, and water and reduce the labor necessary to install the metal jacketing system. 

Aluminum Fittings

Aluminum Fittings

Aluminum pipe fittings ( elbow, tee, cap ) are made in two or four precision formed matching halves to cover and weatherproof pipe elbow, tee and caps.Performed aluminum pipe fittings are a premier protective outer surface for mechanical insulation systems on pipe and are an excellent performing and critical accessory to complement the aluminum jacketing, to protect the insulation and underlying pipe from physical damage, UV exposure, corrosive atmospheres, and water and reduce the labor necessary to install the metal jacketing system. 

Lead Ingots

Lead Ingots

Aluminum is a silvery-white metal, and its content in the earth's crust ranks third after oxygen and silicon. Aluminum has a low density, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is the non-ferrous metal with the second largest output and usage in the world after steel. The density of aluminum is only 2.7103g/cm³, which is about 1/3 of the density of steel, copper or brass. Because aluminum is light, it is often used in the manufacture of land, sea and air transportation vehicles such as cars, trains, subways, ships, airplanes, rockets, and spacecraft to reduce their own weight and increase their load capacity.

Lead Ingots

Lead Ingots

Aluminum is a silvery-white metal, and its content in the earth's crust ranks third after oxygen and silicon. Aluminum has a low density, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is the non-ferrous metal with the second largest output and usage in the world after steel. The density of aluminum is only 2.7103g/cm³, which is about 1/3 of the density of steel, copper or brass. Because aluminum is light, it is often used in the manufacture of land, sea and air transportation vehicles such as cars, trains, subways, ships, airplanes, rockets, and spacecraft to reduce their own weight and increase their load capacity.

Lead Ingots

Lead Ingots

Aluminum is a silvery-white metal, and its content in the earth's crust ranks third after oxygen and silicon. Aluminum has a low density, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is the non-ferrous metal with the second largest output and usage in the world after steel. The density of aluminum is only 2.7103g/cm³, which is about 1/3 of the density of steel, copper or brass. Because aluminum is light, it is often used in the manufacture of land, sea and air transportation vehicles such as cars, trains, subways, ships, airplanes, rockets, and spacecraft to reduce their own weight and increase their load capacity.

Lead Ingots

Lead Ingots

Aluminum is a silvery-white metal, and its content in the earth's crust ranks third after oxygen and silicon. Aluminum has a low density, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is the non-ferrous metal with the second largest output and usage in the world after steel. The density of aluminum is only 2.7103g/cm³, which is about 1/3 of the density of steel, copper or brass. Because aluminum is light, it is often used in the manufacture of land, sea and air transportation vehicles such as cars, trains, subways, ships, airplanes, rockets, and spacecraft to reduce their own weight and increase their load capacity.

Lead Ingots

Lead Ingots

Aluminum is a silvery-white metal, and its content in the earth's crust ranks third after oxygen and silicon. Aluminum has a low density, only 34.61% of iron and 30.33% of copper, so it is also called a light metal. Aluminum is the non-ferrous metal with the second largest output and usage in the world after steel. The density of aluminum is only 2.7103g/cm³, which is about 1/3 of the density of steel, copper or brass. Because aluminum is light, it is often used in the manufacture of land, sea and air transportation vehicles such as cars, trains, subways, ships, airplanes, rockets, and spacecraft to reduce their own weight and increase their load capacity.

SGCC Galvanized Sheet

SGCC Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

DC01 Galvanized Sheet

DC01 Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

SGCH Galvanized Sheet

SGCH Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

DC02 Galvanized Sheet

DC02 Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

DX52D Galvanized Sheet

DX52D Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

SPCC Galvanized Sheet

SPCC Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

DX51D Galvanized Sheet

DX51D Galvanized Sheet

The special coating structure makes it have excellent corrosion resistance. The normal service life of the galvalume steel sheet can reach 25a, the heat resistance is very good, and it can be used in a high temperature environment of 315 ° C; the adhesion between the coating and the paint film is good, and it has good processing performance, which can be punched, sheared, welded, etc.; The surface conductivity is very good.

SPCC Galvanized Coil

SPCC Galvanized Coil

Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.

Galvanized Coil

Galvanized Coil

Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.

< 1...456...16 > proceed page